Edelrid Ohm Assisted Belay Device

£110.00

Not a belay device but a device to assist light belayers with heavy climbers. 

Only 2 left in stock

SKU: Edelrid Ohm Categories: , , ,

Product Description

Assisted-braking resistor to increase rope friction when there is a large weight difference between belayer and lead climber. In the event of a fall, the OHM increases the amount of rope friction so that a lighter belayer can hold a heavier lead climber without difficulty.

  • Belayer requires significantly less hand braking force to arrest a fall
  • Lowering a heavier climber is much easier to control
  • OHM is attached at the first bolt in the safety chain
  • Should a lead climber fall at the first bolt, the OHM significantly reduces the risk of a possible ground fall
  • Rope handling when belaying a lead climber not affected (no additional friction when paying out rope)
  • Recommended weight difference (lead climber > belayer): 10 – 40 kg
  • Minimum weight belayer: 40 kg
  • For single ropes from 8.9 – 11.0 mm
  • Fmax. Vertical [Kn]: 15
  • Approved rope diameter [mm]: 8,9 – 11
  • CE marking: CE 0123
  • country of origin: Germany
  • Weight: 470 g

Additional Information

Weight 600 g
Brand

Edelrid

gtin